Short answer: To stop WordPress form spam without CAPTCHA in Easy Form Builder, turn on silentCAPTCHA Spam Protection under Settings » Captchas (included in every plan, needs the Shield Security plugin), or install the Form Security & Spam Protection add-on (Pro), which adds a hidden honeypot, single-use tokens and rate limits. Neither shows visitors a puzzle.
Quick facts
- Plan: Free, Free Plus and Pro for the built-in checks, the silentCAPTCHA switch and reCAPTCHA v2; Pro for the Form Security & Spam Protection add-on
- Time: about 10 minutes
- Tested with: Easy Form Builder 4.3.1 on WordPress 7.1.4
- Last verified:
- Requires: the Shield Security plugin for silentCAPTCHA
- Requires: an active Pro license for the add-on
- Step 1: WordPress form spam protection by plan
- Step 2: Open Settings » Captchas
- Step 3: Turn on silentCAPTCHA
- Step 4: Honeypot and rate limits (Pro add-on)
- Step 5: Test with bot-like requests
- When reCAPTCHA is still the better choice
- Troubleshooting
- Frequently asked questions
Step 1 — WordPress form spam protection: what each plan includes
Easy Form Builder 4.3.1 has four layers against automated submissions. Three of them work on every plan; only the add-on needs Pro. Use this table to decide which steps apply to your site.
| Protection | Visitors see a CAPTCHA? | Plan | What you have to do |
|---|---|---|---|
| Built-in request checks: security token on every request, server-side field validation, limits on confirmation-code lookups and file uploads | No | Free, Free Plus, Pro | Nothing, always on |
| silentCAPTCHA Spam Protection (Shield Security integration) | No | Free, Free Plus, Pro | Install the Shield Security plugin, then turn on the switch (steps 2 and 3) |
| Form Security & Spam Protection add-on: behavior-based bot detection, hidden honeypot field, signed single-use tokens, per-IP rate limits | No | Pro | Install it under Add-ons (step 4) |
| reCAPTCHA v2 (Google) | Yes, a checkbox | Free, Free Plus, Pro | Add your keys and turn it on per form (see below) |
To see where your site stands, open Easy Form Builder » Add-ons and find the Form Security & Spam Protection card. On a Free or Free Plus site its button reads Pro; on a Pro site it reads Install.

Step 2 — Open the spam settings under Settings » Captchas
Go to Easy Form Builder » Panel, click Settings in the top menu and open the Captchas tab. It has two sections: reCAPTCHA v2 with the Site Key and Secret Key fields, and silentCAPTCHA Spam Protection with one switch. The switch here is the site-wide default for all forms.

Note: While the Shield Security plugin is not active, the switch is greyed out and the tab says Shield Security is not detected, but it can be installed to enhance security. That is what our test site shows in the screenshot above.
Step 3 — Turn on silentCAPTCHA, a reCAPTCHA alternative without a checkbox
Install and activate Shield Security from WordPress.org, reload the Captchas tab, turn on silentCAPTCHA Spam Protection and click Save. From then on, Easy Form Builder asks Shield on every submission whether the sender is a bot. If Shield says yes, nothing is saved, no email is sent, and the sender sees: Sorry, there seems to be an error. Please verify that you are human and try again.
To decide per form, open Panel, click Edit on the form and open Form Settings. The silentCAPTCHA Spam Protection switch there overrides the site-wide setting for that form; Add Google reCAPTCHA to the form sits right above it. The existing silentCAPTCHA setup guide walks through the Shield side in detail.

Step 4 — Add a WordPress form honeypot and rate limits with the Pro add-on
The Form Security & Spam Protection add-on is the part that needs no other plugin and no outside service. According to the plugin’s readme for 4.3.1 it scores real browser behavior, adds a hidden honeypot field, signs a single-use security token for each request and limits requests per IP address for form submissions, file uploads, confirmation-code lookups, public replies and payment requests. Suspicious entries can be saved without triggering email, SMS, Telegram, webhook or Google Sheets actions.
On a Pro site, click Install on the card under Add-ons. The add-on starts in Monitor only mode, so you can review real traffic first; in Soft block or Strict mode suspicious requests are quarantined or blocked. On a Free or Free Plus site the same click opens the dialog below, and nothing is installed. We could not activate Pro on our test site, so this step is described from the 4.3.1 code and readme, not from a test.

Step 5 — Test it: can bots still submit your form?
We sent bot-like requests to a Free Plus test site with no add-on and no Shield Security, so the table shows what the built-in checks do on their own. Repeat the last test yourself: open your confirmation-code page logged out and enter wrong codes until the message changes.
| Bot-like request | What happened |
|---|---|
| Direct POST to the form endpoint without a security token | Refused with HTTP 403; nothing saved |
| Direct POST with a made-up token | Refused with HTTP 403; nothing saved |
| A finished submission sent a second time | Answered with the first result; no second entry |
| Scripted submission with an invalid email address or a missing required field | Refused: Please enter valid value for the Email field. |
| Scripted submission with an extra field the form does not have | Entry saved without the extra field |
| Script that loads the page first and sends complete, valid data | Accepted and saved |
| The same script with reCAPTCHA on and no reCAPTCHA answer | Refused: There seems to be a problem with the Captcha. Please try again. |
| 25 wrong confirmation codes from one IP address | The next lookup is refused: Too many attempts. Please wait a few minutes and try again. |

Warning: The built-in checks stop blind and malformed requests, but they are not a spam filter: a script that behaves like a browser still gets through. For that you need silentCAPTCHA, the Pro add-on or reCAPTCHA.
When is reCAPTCHA still the better choice?
Use reCAPTCHA v2 when a form is under attack right now and you have neither Shield Security nor Pro, or as a second layer on your most abused form: both checks run independently. Paste your keys from the Google reCAPTCHA admin console into Site Key and Secret Key, click Save, then turn on Add Google reCAPTCHA to the form in Form Settings. For the confirmation-code page, use Enable Google reCAPTCHA in the response box on the Responses & Confirmation tab. The reCAPTCHA setup guide has every click.
Two limits to know: reCAPTCHA cannot be added to payment forms, and it loads a script from Google and checks every answer with Google. Our screenshot uses Google’s public test keys, which always pass and show a red notice, so use them for testing only.

Troubleshooting
| Symptom | Likely cause | Fix |
|---|---|---|
| The silentCAPTCHA Spam Protection switch is grey and cannot be clicked | Shield Security is not installed or not active | Install and activate Shield Security, then reload the page |
| The add-on card shows Pro and opens A Pro version feature | The site is on Free or Free Plus | Activate a Pro license, then click Install on the card |
| Spam still arrives although nothing is misconfigured | Only the built-in checks are active (see the test in step 5) | Turn on silentCAPTCHA, install the Pro add-on or add reCAPTCHA |
| Real visitors see Too many attempts. Please wait a few minutes and try again. | 25 wrong confirmation codes came from their IP address within 15 minutes, for example from a shared office network | Wait 15 minutes without new wrong attempts; correct codes do not count towards this limit |
Visitors get a 403 error when they submit | A security plugin, firewall or CDN blocks or strips the form’s REST request | See how to fix the 403 error after submitting a form |
| The reCAPTCHA box shows a red “testing purposes only” notice | Google’s test keys are saved | Replace them with your own keys under Settings » Captchas |
Frequently asked questions
How do I stop spam form submissions on WordPress for free?
In Easy Form Builder, two options cost nothing on any plan: silentCAPTCHA Spam Protection, which works invisibly once the Shield Security plugin is active, and Google reCAPTCHA v2, which shows a checkbox. The built-in request checks are always on.
Does Easy Form Builder have a honeypot field?
Yes, as part of the Form Security & Spam Protection add-on, which needs Pro. Forms on Free and Free Plus have no honeypot field in version 4.3.1.
Do I need Easy Form Builder Pro for silentCAPTCHA?
No. The switch is in Free, Free Plus and Pro. It only becomes clickable when the separate Shield Security plugin is active, because Shield makes the bot decision.
Does the Pro add-on send visitor data to an outside anti-spam service?
No. According to the plugin’s readme, scoring, tokens, rate limits and security logs are processed and stored on your own WordPress site. The logs keep hashed identifiers instead of raw IP addresses and are kept for 30 days by default.
Can I use reCAPTCHA together with silentCAPTCHA or the add-on?
Yes. The reCAPTCHA check and the bot check are separate steps of every submission, so a form can use both. Payment forms are the exception: they cannot use reCAPTCHA.
What’s next
That’s it: you know which spam protection your plan includes, where its switches are, and what the form does when a bot knocks.
- Best practices for form security and spam prevention — the reasoning behind each layer
- Activate Easy Form Builder Pro to install the Form Security & Spam Protection add-on
Written for Easy Form Builder 4.3.1 on . Steps 1, 2, 3 and 5 and the reCAPTCHA section were tested on a Free Plus site with new screenshots; the Pro add-on in step 4 is described from the plugin’s code and readme.